XU 1 · XU 2 · XU 3 · GREATER NOIDA

Modular Kitchen in Xu 1, Xu 2 and Xu 3, Greater Noida
— built at our own Kasna Road factory.

Greater Noida Modular Kitchen Factory (GNMK) is a manufacturer, not a dealer. Your kitchen is made at our own factory on Kasna Road, Greater Noida, and our own team delivers and installs it. The measurement visit is free in Greater Noida.

  • ✓ Free measurement visit in Greater Noida
  • ✓ Itemised quote after measurement
  • ✓ Warranty as per specs used
Free measurement visit in Greater Noida
Factory rate per sq.ft
Own team delivery and installation
THE SECTORS

Xu 1, Xu 2 and Xu 3: what each one is listed as.

Xu 1, where listings are for independent houses and plots

Listings for Xu 1 are independent houses and plots. The pin code listed for Xu 1 is 201310. It is listed beside Xu 2 and Mu 1.

In Xu 2, plots sit in Blocks A, B, C and D

Listings here are independent houses and plots, with plots in Blocks A, B, C and D. The pin code is 201310. Xu 2 borders Xu 1 and Xu 3, and Mu 1 is listed near it. The metro stations listed near Xu 2 are Depot, GNIDA Office and Delta 1 on the Aqua Line. Arya Dharam Public School is listed among schools near Xu 2.

Xu 3, a sector with residential plots

Listings for Xu 3 include residential plots. Places listed near it are Xu 1, Xu 2, Omicron 1A, Mu 1 and Raipur village. Samsara The World Academy and Holy Public School are listed among schools near Xu 3.

When you message, tell us the sector exactly — Xu 1, Xu 2 or Xu 3 — with the block and plot or house number.

PLOTTED HOUSES

A kitchen for a house on a plot: what helps the plan.

Which floor, and photos of each wall

Tell us which floor the kitchen is on and how the stairs reach it. Send photos of each wall, with the window, sink, gas point and electric points visible. Wall lengths help the estimate.

More than one kitchen in one house

A house can have a kitchen on more than one floor, for example one per floor. Tell us how many kitchens you need. All of them go into the same itemised quote.

Estimate first, then the visit

Start with wall lengths and photos on WhatsApp, or use the online calculator. The measurement visit in your Xu sector is free, and it comes before the final design and quote.

LAYOUTS

Six layouts, one for your walls.

L-shaped

Runs along two walls that meet at a corner.

U-shaped

Uses three walls, with work space on all sides.

Straight

A single run of cabinets along one wall.

Parallel

Two facing runs with a walkway between them.

Island

Adds a freestanding counter where the room allows.

G-shaped

A fourth partial wall extends the U shape.

The shape depends on your walls and is decided after measurement. See the Greater Noida modular kitchen page for more.

WHAT YOU PAY

Cabinet front area × rate — the number behind your quote.

Cabinet front area is the area of the cabinet fronts you see, in sq.ft. The rate comes from six choices in the calculator: carcass board, carcass edge tape, shutter finish, fittings, shutter board and shutter edge tape. Kitchen combinations run from Rs 1,140 to Rs 2,155 per sq.ft. Shutter finish add-ons: laminate Rs 300, Merino/Century Rs 375, acrylic Rs 450, PU painted Rs 900 per sq.ft. Glass finishes are wardrobe-only. Attachments, countertop, sink, chimney, hob and appliances are extra. The factory rate is the same everywhere.

The online calculator gives a per sq.ft estimate from your choices. See also the modular kitchen price guide.

MATERIALS

Four boards, Hettich fittings.

The boards in the calculator

  • ✓ HDHMR prelam
  • ✓ HDHMR plain with 0.8mm laminate
  • ✓ Century Sainik 710 BWR
  • ✓ Club Prime BWP

The fittings

The fittings in the calculator are Hettich. Each board and fitting choice changes the per sq.ft rate. You can see the boards and fittings at the factory before you order.

HOW AN ORDER MOVES

Five steps, message to fitted kitchen.

  1. 01

    Send size and photos

    WhatsApp your kitchen size and photos to +91 98215 27068, or use the online calculator for a per sq.ft estimate.

  2. 02

    Free measurement visit

    We visit your house in Xu 1, Xu 2 or Xu 3 and measure. The visit is free inside Greater Noida.

  3. 03

    Design and itemised quote

    You get the design and an itemised quote. The timeline depends on size and design, and is given in writing with the quote once the design is final.

  4. 04

    Built at our factory

    The kitchen is built at our own factory on Kasna Road, Greater Noida.

  5. 05

    Delivery and installation

    Our own team delivers and installs the kitchen. Warranty as per specs used.

KASNA ROAD

Walk into the factory before you choose.

You can walk in to see boards, finishes and fittings during opening hours. The factory is at Bindal Enclave, Plot no 3, Bindal Enclave Rd, near Ambedkar Hostel, Kasna Road, Greater Noida, UP 201308. Open Monday to Sunday, 7:00 AM to 10:00 PM. Our address and phone are also on the contact page.

FAQ

Xu 1, Xu 2 and Xu 3: kitchen questions.

How much does a modular kitchen cost in Xu 1, Xu 2 or Xu 3?

The price is the cabinet front area in sq.ft multiplied by the rate you choose. Kitchen combinations run from Rs 1,140 to Rs 2,155 per sq.ft, from six choices in the calculator. Shutter finish add-ons: laminate Rs 300, Merino/Century Rs 375, acrylic Rs 450, PU painted Rs 900 per sq.ft. Attachments, countertop, sink, chimney, hob and appliances are extra. The factory rate is the same everywhere. Use the online calculator for a per sq.ft estimate.

Is the measurement visit free in the Xu sectors?

The measurement visit is free inside Greater Noida, and Xu 1, Xu 2 and Xu 3 are Greater Noida sectors, so the visit to your house is free.

I have an independent house in Xu 2. What should I send?

Send the sector, block and plot or house number, which floor has the kitchen, how the stairs reach it, photos of each wall and the wall lengths. Then the free measurement visit follows.

My house has a kitchen on two floors. Can both be in one quote?

Tell us how many kitchens you need. Each is measured at the visit, and all of them go into the same itemised quote.

Can I get an estimate before anyone visits?

Use the online calculator for a per sq.ft estimate from your choices, or send wall lengths and photos on WhatsApp at +91 98215 27068. The free measurement visit comes before the final design and quote.

Which kitchen shape suits my house?

It depends on your walls. We make L-shaped, U-shaped, straight, parallel, island and G-shaped kitchens. The shape is decided after measurement.

Which boards can I choose?

The calculator offers four boards: HDHMR prelam, HDHMR plain with 0.8mm laminate, Century Sainik 710 BWR and Club Prime BWP. Each choice changes the rate. You can see the boards at the factory on Kasna Road.

Are countertop, sink, chimney and hob included?

No. Countertop, sink, chimney and hob are extra, as are attachments and appliances.

What warranty do you give?

Warranty as per specs used.

Planning a modular kitchen in Xu 1, Xu 2 or Xu 3? WhatsApp us for an estimate.

Send your sector, block, plot or house number, wall lengths and photos.

Also see: Greater Noida · Mu and Pi sectors · Omega and Omicron sectors · Sigma sectors

Areas we serve