See everything first
Walk-in factory visits run Monday to Sunday, 7:00 AM to 10:00 PM. You can see the boards, shutter finishes and fittings before you order.
Your kitchen is made on Kasna Road. Greater Noida Modular Kitchen Factory (GNMK) is a manufacturer with its own factory on Kasna Road, Greater Noida (not a dealer), and our own team delivers and installs the kitchen in your home.
Walk-in factory visits run Monday to Sunday, 7:00 AM to 10:00 PM. You can see the boards, shutter finishes and fittings before you order.
Bindal Enclave, Plot no 3, Bindal Enclave Rd, near Ambedkar Hostel, Kasna Road, Greater Noida, UP 201308. You can also reach us at the contact page.
Kasna is in Gautam Buddh Nagar district. The Kasna branch post office pin code is 201310. Our factory is on Kasna Road, Greater Noida.
Surajpur is in the Greater Noida area. Surajpur Wetland, near Surajpur village in Dadri tehsil, is listed by the district as a tourist place and as an example of an urban wetland in the Yamuna basin.
Dadri is a city with a municipal board in Gautam Buddh Nagar district, and one of the district's three tehsils. Dadri railway station is on the Delhi-Kanpur section. Dadri's pin code is 203207. For Dadri, the visit date and any travel charge are confirmed on WhatsApp before the visit, and transport is shown in the quote.
Ecotech 3 is listed by property sites as a Greater Noida locality with Surajpur and Habibpur among the places nearby. Vihaan Galaxy, a society with 2 and 3 BHK apartments, is listed there. For a flat, send the society name, tower and flat number with wall lengths and photos.
Replacing an old kitchen? Send us photos of the platform, sink and gas point, plus the wall lengths. The new modular kitchen is priced the same way as any other: cabinet front area multiplied by the rate. Send on WhatsApp: your place, house or building name or an address landmark, the floor, the wall lengths, and photos of each wall showing the window, sink and gas point. We give an itemised quote after the measurement visit.
Runs along two walls, so it may suit a room where two walls are free.
Uses three walls and tends to give the most counter space.
A single run of cabinets, which can fit a narrow or open room.
Two facing runs, often comfortable for a walk-through kitchen.
Adds a freestanding counter block where the room allows one.
A U-shape with an extra arm, for maximum storage.
The price is the cabinet front area — the area of the cabinet fronts you see, in sq.ft — multiplied by a rate built from six choices in the calculator: carcass board, carcass edge tape, shutter finish, fittings, shutter board and shutter edge tape. Kitchen combinations run from Rs 1,140 to Rs 2,155 per sq.ft. Shutter finish add-ons per sq.ft: laminate Rs 300, Merino/Century Rs 375, acrylic Rs 450, PU painted Rs 900. Glass finishes are wardrobe-only. Attachments, countertop, sink, chimney, hob and appliances are extra. The factory rate is the same everywhere.
See also the modular kitchen price guide.
The calculator lets you price these boards: HDHMR prelam, HDHMR plain with 0.8mm laminate, Century Sainik 710 BWR and Club Prime BWP. The fittings in the calculator are Hettich. You can see boards, finishes and fittings at the factory on Kasna Road.
Send your kitchen size and photos to +91 98215 27068, or start with the online calculator for a first estimate.
Free in Kasna and Surajpur. For Dadri, the visit date and any travel charge are confirmed on WhatsApp before the visit.
You get the design and an itemised quote. The timeline depends on size and design and is given in writing with the quote once the design is final.
The kitchen is built at our Greater Noida factory on Kasna Road, then delivered and installed by our own team. Warranty as per specs used.
The price is the cabinet front area in sq.ft multiplied by the rate. Kitchen combinations run from Rs 1,140 to Rs 2,155 per sq.ft, depending on your six choices: carcass board, carcass edge tape, shutter finish, fittings, shutter board and shutter edge tape. Shutter finish add-ons: laminate Rs 300, Merino/Century Rs 375, acrylic Rs 450, PU painted Rs 900 per sq.ft. Attachments, countertop, sink, chimney, hob and appliances are extra. The factory rate is the same everywhere. Use the price calculator for an estimate.
At Bindal Enclave, Plot no 3, Bindal Enclave Rd, near Ambedkar Hostel, Kasna Road, Greater Noida, UP 201308. Walk-in visits are welcome Monday to Sunday, 7:00 AM to 10:00 PM, to see boards, finishes and fittings.
Yes. Kasna and Surajpur are in Greater Noida, and measurement visits are free inside Greater Noida.
For Dadri, the visit date and any travel charge are confirmed on WhatsApp before the visit, and transport is shown separately in the quote.
The new modular kitchen is priced the same way as any other: cabinet front area multiplied by the rate. Send photos of the platform, sink and gas point plus the wall lengths, and we will give an itemised quote after the measurement visit.
GNMK is a manufacturer with its own factory (not a dealer). The factory is on Kasna Road, Greater Noida.
No. Attachments, countertop, sink, chimney, hob and appliances are extra.
It depends on the kitchen size and design. The timeline is given in writing with the quote once the design is final.
Warranty as per specs used.
Send your kitchen size and photos. Itemised quote after measurement.
Also see: modular kitchen in Greater Noida · Phi sectors · Pari Chowk · Omega and Omicron