Flats in society towers
Noida is known for its tall buildings. If your flat kitchen is compact, it usually works best as an L-shaped or parallel kitchen. In a flat the plumbing and gas points are usually fixed, so the design is planned around them.
Greater Noida Modular Kitchen Factory (GNMK) is a manufacturer, not a dealer. We build modular kitchens for Noida homes — flats in society towers, builder floors and independent houses — in our own factory, and sell at the same factory rate everywhere. Our factory is in Greater Noida, linked to Noida by the Noida-Greater Noida Expressway and the Aqua Line.
Noida is known for its tall buildings. If your flat kitchen is compact, it usually works best as an L-shaped or parallel kitchen. In a flat the plumbing and gas points are usually fixed, so the design is planned around them.
In a builder floor, if the kitchen has more room, a U-shaped layout or an L-shaped run with a loft for storage above can work.
In an independent house, if the room allows, an island or a G-shaped kitchen can add work surface and storage.
Sectors that line the Noida-Greater Noida Expressway include 44, 45, 92–94, 96–100, 105, 108, 125–137 and 141–168.
Other Noida sectors get the same factory rate, with transport shown separately in the quote. The DND Flyway links Noida to Delhi; the Blue Line and the Aqua Line also serve the city.
Greater Noida is about 25 km from Noida, linked by the Noida-Greater Noida Expressway and the Aqua Line. Your kitchen is built at our factory in Bindal Enclave, Kasna Road, Greater Noida, and delivered and installed by our own team.
Two runs of cabinets along adjacent walls. Often a good fit when a flat kitchen is compact.
Cabinets on three sides. Suits builder floors and larger kitchens where more counter space helps.
A single run of cabinets. Works in narrow kitchens and small apartments.
Two facing runs. Can suit a kitchen that is a long passage with walls on both sides.
An island adds work surface and storage. Needs the room of an independent house kitchen.
A partly closed fourth run. For large kitchens in independent Noida homes.
A price given only as "from Rs X lakh" tells you little about your own kitchen. Ours is worked out like this. Your price is the cabinet front area in sq.ft × a rate you build from six choices in the calculator: carcass board, carcass edge tape, shutter finish, fittings, shutter board and shutter edge tape. Kitchen combinations run from Rs 1,140 to Rs 2,155 per sq.ft. Shutter finish add-ons: laminate Rs 300, Merino/Century Rs 375, acrylic Rs 450, PU painted Rs 900 per sq.ft (glass finishes are wardrobe-only). Attachments, countertop, sink, chimney, hob and appliances are extra.
Not sure of the cabinet front area? WhatsApp a photo and the kitchen size to +91 98215 27068. See also the modular kitchen price guide.
Moisture is a common worry in any kitchen. Compare the four boards on price in the calculator, and see them in person at a factory visit before you order.
Glass finishes are wardrobe-only. You can see boards, finishes and fittings at a factory visit.
Send your kitchen size and a few photos to +91 98215 27068, or use the online price calculator for a first estimate.
Site visits inside Greater Noida are free. For Noida, we confirm the visit date and any travel charge on WhatsApp before the visit.
You get the design and an itemised quote — transport to Noida shown separately. After approval, the kitchen is built at our Greater Noida factory. The timeline depends on size and design, and is given in writing with the quote once the design is final.
Our own team brings the kitchen to your home in Noida and installs it. Warranty as per specs used.
You do not have to order from photos alone. Walk in to the factory at Bindal Enclave, Plot no 3, Bindal Enclave Rd, near Ambedkar Hostel, Kasna Road, Greater Noida, UP 201308 — open Monday to Sunday, 7:00 AM to 10:00 PM — and see the boards, shutter finishes and fittings in person before you decide. You can also reach us through the contact page.
The price is the cabinet front area in sq.ft multiplied by a rate you build in the online calculator. Kitchen combinations run from Rs 1,140 to Rs 2,155 per sq.ft. Shutter finish add-ons: laminate Rs 300, Merino/Century Rs 375, acrylic Rs 450, PU painted Rs 900 per sq.ft. Attachments, countertop, sink, chimney, hob and appliances are extra.
Kitchen combinations cost Rs 1,140 to Rs 2,155 per sq.ft. The exact rate comes from six choices in the calculator: carcass board, carcass edge tape, shutter finish, fittings, shutter board and shutter edge tape.
No. The rate is the same factory rate everywhere. The only difference for Noida is that transport is shown separately in the quote.
Site visits inside Greater Noida are free. For Noida, we confirm the visit date and any travel charge on WhatsApp before the visit, so there are no surprises.
The calculator offers four boards: HDHMR prelam, HDHMR plain with 0.8mm laminate, Century Sainik 710 BWR and Club Prime BWP. Compare them on price in the calculator and see them at a factory visit before you choose.
It depends on the room. A compact flat kitchen often suits an L-shaped or parallel layout. U-shaped kitchens suit bigger builder-floor kitchens, and island or G-shaped layouts need the room of an independent house. See the L-shaped, parallel and U-shaped pages for details.
It depends on the size and design of the kitchen. Once the design is final, we give the timeline in writing with the quote.
Warranty as per specs used.
At our factory: Bindal Enclave, Plot no 3, Kasna Road, Greater Noida. Walk-in visits are welcome Monday to Sunday, 7:00 AM to 10:00 PM, to see boards, finishes and fittings.
No. Attachments, countertop, sink, chimney, hob and appliances are extra, and are listed separately so the quote stays clear.
Send your kitchen size and photos. Get an itemised quote.