SECTOR 168 · NOIDA EXPRESSWAY · NOIDA

Modular Kitchen in Sector 168 Noida

Modular kitchens for homes in Sector 168 Noida, made at our own factory in Greater Noida and installed by our own team.

  • ✓ Manufacturer, not a dealer
  • ✓ Itemised quote after the measurement visit
  • ✓ Factory on Kasna Road, Greater Noida
Factory rate per sq.ft
Transport shown separately in the quote
Own team delivery and installation
SECTOR 168 NOIDA

Sector 168: the societies and what is around them.

Sector 168 is a residential pocket on the Noida-Greater Noida Expressway. Housing here is mainly apartments in gated societies, with plots also listed in the sector.

Societies in Sector 168

  • Paras Seasons
  • 3C Lotus Zing
  • Nimbus The Golden Palms
  • Urbtech Xaviers
  • Sunworld Arista

Metro, schools and neighbouring sectors

  • The Noida-Greater Noida Expressway is listed among the sector's roads.
  • The Sector 142 station on the Aqua Line and the Sector 137 station are listed for it.
  • Schools named nearby include Shiv Nadar School, Great Columbus School and Shanti International School.
  • Nearby sectors: Sector 135, Sector 137, Sector 142 and Sector 143.
SOCIETY FLATS

Planning a kitchen in a Sector 168 society flat.

What to send from the flat

  • ✓ Society name, tower and flat number
  • ✓ The floor the kitchen is on
  • ✓ Photos of each wall of the kitchen
  • ✓ Wall lengths
  • ✓ Positions of the window, sink and gas point

Before installation day

  • ✓ Check the society's work-timing rules and lift rules before the installation day, so the fitting goes smoothly.
  • ✓ Plots are also listed in the sector. For a house on a plot, tell us which floor the kitchen is on.
  • ✓ The kitchen is measured at the visit before the final design and quote.
DELIVERY TERMS

How a kitchen reaches Sector 168.

Every kitchen is built at our own factory in Greater Noida, and our own team delivers and installs them for homes in Sector 168. For Noida, the site-visit date and any travel charge are confirmed on WhatsApp before the visit, and transport is shown separately in the quote. See also the Noida modular kitchen page. Sector 137 and Sector 143 are listed nearby Sector 168; see the Sector 137 page and the Sector 143 and 144 page.

KITCHEN LAYOUTS

Six shapes, and the room each one needs.

L-shaped

Runs along two adjoining walls, which can suit a flat where two walls are free.

U-shaped

Uses three walls, for rooms where the third wall is not blocked.

Straight

A single run along one wall, often the fit for narrow kitchens.

Parallel

Two facing runs, for rooms with clearance on both sides.

Island

Adds a freestanding counter, where the room has open floor in the middle.

G-shaped

A fourth short leg added to a U, for rooms with wall space to spare.

PRICING

What goes into the per sq.ft figure.

The price is the cabinet front area — the area of the cabinet fronts you see, in sq.ft — multiplied by a rate built from six choices in the calculator: carcass board, carcass edge tape, shutter finish, fittings, shutter board and shutter edge tape. Kitchen combinations run from Rs 1,140 to Rs 2,155 per sq.ft. Shutter finish add-ons: laminate Rs 300, Merino/Century Rs 375, acrylic Rs 450 and PU painted Rs 900 per sq.ft; glass finishes are wardrobe-only. Attachments, countertop, sink, chimney, hob and appliances are extra. The factory rate is the same everywhere, and for Noida transport is added as its own line in the quote.

See also the modular kitchen price guide.

MATERIALS

Which carcass board, which fittings.

The calculator offers four carcass boards: HDHMR prelam, HDHMR plain with 0.8mm laminate, Century Sainik 710 BWR, and Club Prime BWP. The fittings in the calculator are Hettich. You can see all of them at the factory before you decide.

HOW IT WORKS

Message, visit, design, build, install.

  1. 01

    Send size and photos

    WhatsApp your kitchen size and photos to +91 98215 27068, or use the online calculator for a first estimate.

  2. 02

    Measurement visit

    For Noida, the visit date and any travel charge are confirmed on WhatsApp before the visit.

  3. 03

    Design and itemised quote

    You get the design and an itemised quote. The timeline depends on size and design, and is given in writing with the quote once the design is final.

  4. 04

    Build and installation

    The kitchen is built at our Greater Noida factory, and our own team delivers and installs it.

FACTORY VISIT

The factory floor on Kasna Road is open.

Walk in during opening hours to see boards, finishes and fittings. Address: Bindal Enclave, Plot no 3, Bindal Enclave Rd, near Ambedkar Hostel, Kasna Road, Greater Noida, UP 201308. Open Monday to Sunday, 7:00 AM to 10:00 PM.

FAQ

Sector 168 modular kitchen: questions and answers.

How much does a modular kitchen cost in Sector 168 Noida?

The price is the cabinet front area in sq.ft multiplied by the rate from your six choices in the calculator. Kitchen combinations run from Rs 1,140 to Rs 2,155 per sq.ft, with shutter finish add-ons of laminate Rs 300, Merino/Century Rs 375, acrylic Rs 450 and PU painted Rs 900 per sq.ft. Attachments, countertop, sink, chimney, hob and appliances are extra. The factory rate is the same everywhere, and for Noida transport is shown separately in the quote. Try the price calculator.

Is the measurement visit free in Sector 168 Noida?

Free visits are for Greater Noida and Greater Noida West. For Noida, the visit date and any travel charge are confirmed on WhatsApp before the visit.

Do you make kitchens for flats in Paras Seasons or 3C Lotus Zing?

Yes. The kitchen is measured at the visit, then you get the design and an itemised quote. It is built at our factory in Greater Noida and installed by our own team.

Do you also make kitchens for Nimbus The Golden Palms, Urbtech Xaviers or Sunworld Arista?

Yes, the process is the same. Send the society name, tower and flat number on WhatsApp.

Can I get an estimate before anyone visits?

Yes. Use the online calculator, or send your wall lengths and photos on WhatsApp. The measurement visit comes before the final design and quote.

Which boards can I choose?

The calculator offers four carcass boards: HDHMR prelam, HDHMR plain with 0.8mm laminate, Century Sainik 710 BWR and Club Prime BWP. Each choice changes the rate, and you can see them at the factory.

Are countertop, sink, chimney and hob included?

No. They are extra, as are attachments and appliances.

How long will it take?

It depends on the kitchen size and design. The timeline is given in writing with the quote once the design is final.

What warranty do you give?

Warranty as per specs used.

Kitchen for your Sector 168 flat? Message us.

Send your kitchen size and photos on WhatsApp, or call +91 98215 27068.

Also see: Noida · Sector 137 · Sector 143-144 · Sector 134 · Noida Expressway

Areas we serve