People ask us one thing again and again at the factory: is a modular kitchen really better than getting the platform built and a carpenter to make the cabinets? Our honest answer is that it is better for most homes, but not for every reason the brochures give, and it has limits you should know before you pay for one. We make modular kitchens at our factory on Kasna Road, Greater Noida, so this is what we tell customers who walk in.
What a modular kitchen actually is
A modular kitchen is a set of cabinets (boxes, called carcasses) with shutters, drawers and fittings, made to size in a factory and then fixed in your kitchen. The base cabinets sit under the countertop, the wall cabinets go above, and a tall unit can hold a fridge, oven or pantry storage. The countertop, sink, chimney and hob are fitted along with it, but they are separate items and usually priced separately.
“Modular” does not mean you can unscrew it and take it to your next flat like a cupboard. The cabinets are made as separate units, but once they are fixed to the wall and the countertop is cut to fit, moving them is real work. Some units can be reused; the countertop usually cannot.
The real benefits
The cutting happens in a factory, not in your home. With site carpentry, boards are sawn, glued and edged in your kitchen for as long as the job lasts. With a modular kitchen, the cutting, edge taping and drilling for hinges happen at the factory. At home, the work is mostly fixing and fitting, so there is far less dust in a lived-in flat.
You can see the price before anything is made. Because the work is in standard steps, the price can be built from clear choices. In our case the price is the cabinet front area in sq.ft times a rate, and you build that rate in our online calculator from six choices: carcass board, carcass edge tape, shutter finish, fittings, shutter board and shutter edge tape. Our kitchen combinations come to Rs 1,140 to Rs 2,155 per sq.ft. So a kitchen with 60 sq.ft of fronts lands between Rs 68,400 and Rs 1,29,300 before the countertop, sink, chimney, hob, attachments and appliances. A site carpenter’s quote is often a lump sum where it is hard to see what changes if you pick a different board.
You choose the material, by name. You can pick a board for the cabinet boxes and a finish for the shutters separately. The boards we offer are HDHMR prelam, HDHMR plain with 0.8mm laminate, Century Sainik 710 BWR and Club Prime BWP. Shutter finishes range from laminate to acrylic and PU paint. Knowing the exact board matters most under the sink, where water does the damage.
Storage is planned, not improvised. Drawers with proper channels, baskets, corner units and a tall pantry make better use of a small kitchen than open shelves on a masonry platform.
Parts can be fixed one at a time. If a hinge wears out or one shutter gets damaged, it can usually be replaced without touching the rest. Concealed hinges like the Hettich fittings we use have adjustment screws, so a shutter that drops slightly can be set right with a screwdriver.
The limits nobody puts in the brochure
It can cost more than a basic platform kitchen. A masonry platform with granite and a few local-made shutters can be cheaper up front. You pay more for a modular kitchen because of the board, the fittings and the factory work. Whether that is worth it depends on how long you plan to stay and how much you cook.
Odd rooms need filler pieces. Cabinets are usually planned in standard widths. If your wall does not divide neatly, the gaps are closed with filler strips. A good measurement keeps fillers small, but in an old house with walls that are not straight you will see some.
The plumbing and gas points decide a lot. The sink cabinet has to sit where the water and drain are, and the hob where the gas line comes in. Moving those points means a plumber and sometimes breaking tiles. If you are building a house, settle the kitchen plan before the plumber fixes the points.
It takes time to make. A factory kitchen is made after the design is final, so you wait while it is built. With us, the timeline depends on size and design and comes in writing with the quote. We build only after you approve the design.
Cheap modular is still cheap. A low-grade board with poorly sealed edges will swell near the sink whether it was cut in a factory or not. “Modular” is a way of making a kitchen, not a quality mark. Ask what board, what edge tape and what fittings you are paying for, and get it written in the quote.
Which shape suits which kitchen
The room usually decides the shape for you. A straight kitchen runs along one wall and suits narrow rooms. An L-shaped kitchen uses two walls and is the most common in flats. A parallel kitchen has two facing counters for long, narrow rooms. A U-shaped kitchen uses three walls and needs more floor space. G-shaped and island kitchens need bigger, more open rooms, which you find more often in independent houses than in society flats.
If you are deciding now
Send us your kitchen size and a few photos on WhatsApp, or get a rough number from the calculator first. The measuring visit is free inside Greater Noida and Greater Noida West; elsewhere we confirm the date and any travel charge before we come. You can also see the boards, finishes and Hettich fittings at our factory at Bindal Enclave, Kasna Road, any day from 7:00 AM to 10:00 PM. For a full breakdown of each price choice, see our kitchen price guide.
